I had a couple of babies that LOVED their paci! We had to have several on hand at all times. I remember frantically digging through the diaper bag looking for the elusive Binky, finally finding one stuck to the bottom of the bag, covered in crumbs and gunk! I wish I'd had one of these back then!!
This is a little Pacifier pocket that will hold several pacifiers. It is lined with vinyl (fused) fabric! This is a simple project that only took a few minutes to whip up!
My lables were designed and made by MommyMadeIt on etsy! Cute and great prices too!
This pattern is a Copyright of Jana Nielson , Lola...again!!! 2008. It is intended for personal, non-commercial use. You may not make and sell items using this pattern. Thanks!
Step 1- Make a paper pattern. One piece is 4" x 6". The other is 7" x 4 ", taper the top of this one however you would like.
Step 4- place the paper, that you just peeled off the vinyl, shiny side down on top of the vinyl. Press with Iron set on Wool setting. It only takes a few seconds to fuse.
Step 9- Sew the outside together the same way that you did the lining. Sew the other half of the Velcro on the front, about 1/2" down from the edge.
Step 10- Put lining inside of outer bag- wrong sides together.
Your Paci bag is finished!! Embellish it with whatever you want, or leave it plain!